Zinsser® BIN Shellac-Base Interior and Spot Exterior Primer, Interior, Flat White, 1 gal Bucket/Pail, 4/Carton (RST901)

Zinsser® BIN Shellac-Base Interior and Spot Exterior Primer
Looking for a "silver bullet" primer that covers everything? Choose the primer that contractors have kept in their vans for decades: Zinsser BIN Shellac-Base Primer. As the original shellac primer/sealer, nearly nothing is better at permanently covering bleeding wood knots, sap streaks and graffiti as well as water, grease, rust, smoke and many other types of stains. This pioneering primer/sealer permanently blocks most every kind of odor, too. When it comes to preparing indoor surfaces for topcoats while sealing nearly any porous surface, especially where excellent enamel holdout is required, few primers match BIN Shellac-Base Primer. It can even be applied when temperatures dip below freezing. Though it's designed specifically for indoor application to ceilings, walls, doors, trim, cabinets, furniture and more, this versatile product is also capable of spot priming certain exterior surfaces (see product packaging for more details).

Age Recommendation: Ages 16 and Up
Applicable Surface Material: Cement/Concrete; Drywall; Masonry; Metal; Plaster; Plastic; Wood
Application Method: Brush; Roller
Application Temperature Range: 0° to 90° F
Binder/Vehicle Ingredient(s): Shellac
Case Pack: Case of 4
Color Family: White
Color(s): White
Cure/Dry-Time Range: 20 min (Touch); 45 min (Recoat); 1 to 3 days (Full Cure)
Diluent/Solvent Ingredient(s): Denatured Alcohol; Water
Disclaimer Statement: Apply only when air, material and surface temperatures are between 0° and 90° F (-18° and 32° C), surface temperature is within 15° F of the dew point and the relative humidity is below 70%. Not recommended for whole surface exterior application or for application to floors, decks or surfaces subjected to full-immersion and/or prolonged contact with water.
Finish/Sheen: Flat
Footnote 1: Recommended Dry Film Thickness (DFT) Per Coat: 0.75 to 0.9 mil
Footnote 2: Recommended Wet Film Thickness to Achieve DFT: 2.5 to 3 mil
Global Product Type: Building/Construction Paints & Primers
Intended Application Environment: Interior
Maximum Coverage Area: Up to 500 sq ft
Number of Colors: 1
Packaging Type: Bucket/Pail
Paint Sub-Category: Primer; Specialty; Varnish/Shellac; Water-Based
Pigment/Dye/Filler Ingredient(s): Titanium Dioxide
Post-Consumer Recycled Content Percent: 0%
Pre-Consumer Recycled Content Percent: 0%
Product Biodegradability in Days: 0
Product Biodegradability Indicator: N
Product Compostability Indicator: N
Total Recycled Content Percent: 0%
Volume Capacity: 1 gal